SKF 6000-2RSL Deep groove ball bearing with seals

Dimensions & Construction

Bore diameter (d): 10 mm

Outer diameter (D): 26 mm

Width (B): 8 mm

Bearing series: 6000 extra-light / small series

Number of rows: Single-row deep groove.

Cage material: Sheet steel (steel cage)

Sealing: Low-friction rubber seals on both sides (the “2RSL” suffix indicates “low-friction seals, both sides”)

Radial internal clearance: Standard (CN / “normal”) clearance , unless specified otherwise.

Material: Bearing steel for rings and balls.

Lubrication: Pre-lubricated (sealed bearing , no external lubrication needed) - typical for sealed bearings.

Load Ratings & Performance

Basic dynamic load rating (C): ≈ 4.75 kN

Basic static load rating (C₀): ≈ 1.96 kN

Fatigue load limit (Pᵤ or similar): ~ 0.083 kN (as given by supplier tables)

Reference speed rating: 67,000 rpm

Limiting (maximum) speed: ~ 34,000 rpm

Key Features & Suitability

The “2RSL” suffix denotes low - friction rubber double-sided sealing - so the bearing is protected from dust , dirt and small contaminants , grease is retained , and maintenance is minimal.

As a deep - groove , single-row bearing , it supports radial loads primarily - but can also take axial loads in both directions where needed.

Its compact size (10×26×8 mm) and relatively high speed capability make it suitable for small motors, electric motors , light machinery , appliances, and other applications where low friction , sealed-for-life bearings are desired.