SKF 6000-2RSH Deep groove ball bearing

Dimensions & Construction
Parameter Value
Bore diameter ( d) 10 mm

Outer diameter ( D) 26 mm

Width (B) 8 mm

Bearing series 6000 (Extra-light / small bore series)

Number of rows 1 (single-row)

Cage material Sheet metal (steel)

Sealing Rubber seals on both sides (2RSH = contact seals on both sides)

Radial internal clearance CN (normal)

Lubrication Lubricated with grease (sealed bearing , no relubrication slot)

Material Bearing steel (rings + balls)

Load Ratings & Performance

Basic dynamic load rating (C): ~ 4.75 kN

Basic static load rating (C₀): ~ 1.96 kN

Fatigue load limit (Pₙ or Pᵤ): ~ 0.083 kN

Limiting (maximum) speed: 19,000 rpm

Tolerance / clearance class: Standard (CN), standard clearance, typical manufacturing tolerances for this series.

Key Features&Design Notes

The 2RSH version means the bearing is sealed on both sides, with contact rubber seals, providing protection against dust , dirt , and contaminants , and helps to retain grease inside.

Because of the seals and grease filling, the bearing is maintenance-free (no need for constant relubrication in normal conditions).

The design (deep-groove, single row plus sealed) makes it versatile: it can support radial loads and some axial loads in both directions.

Its compact size (10×26×8 mm) and relatively high speed rating make it suitable for small motors , appliances , tools , small machinery, etc. - typical of the “ 6000 ” series light - duty bearings.