SKF 6002-2Z Deep groove ball bearing with seals or shields

Dimensions & Construction

• Bore diameter (d): 15 mm

• Outer diameter (D): 32 mm

• Width (B): 9 mm

• Bearing type: Single ‑ row deep ‑ groove ball bearing

• Shields: Metal shields on both sides (2Z = double‑sided non ‑ contact shields)

• Cage: Steel (sheet ‑ metal) cage

• Internal radial clearance: Normal (standard , CN)

Load Ratings & Performance

• Basic dynamic load rating (C): ~ 5.85 kN

• Basic static load rating (C₀): ~ 2.85 kN

• Approximate fatigue / endurance load limit (Pᵤ): ~ 0.12 kN

• Reference (rated) speed: ~ 50,000 rpm

• Limiting (maximum) speed: ~ 26,000 rpm

• Approximate mass: ~ 0.032 kg (≈ 32 g)

Geometry / Additional Dimensions

• Minimum chamfer / fillet radius (r₁, r₂ min): ~ 0.3 mm

• Minimum shaft ‑ shoulder diameter (da min): ~ 17 mm

• Maximum housing ‑ shoulder diameter (Da max): ~ 30 mm

Characteristics & Typical Use Cases

• As a deep‑groove single ‑ row bearing , 6002‑2Z supports primarily radial loads - but can also handle limited axial loads in both directions when needed.

• The metal shields provide moderate protection from larger particles / contaminants while maintaining low friction and allowing relatively high speed - suitable for clean to moderately dusty environments.

• Its size (15 × 32 × 9 mm) , balanced load capacity and shielding make it suitable for small to medium‑size shafts, electric motors , small machinery , tools , pumps , fans , appliances , and other mechanical applications where a shielded , low ‑ maintenance bearing is desired.