SKF 6001-2RSH/C3 Deep groove ball bearing with seals

Dimensions & Construction

• Bore diameter (d): 12 mm

• Outer diameter (D): 28 mm

• Width (B): 8 mm

• Bearing type: Single - row deep - groove ball bearing

• Seals: Rubber contact seals on both sides (2RSH = double - sided contacting seals)

• Cage: Steel (sheet - metal) cage

• Internal radial clearance: C3 (greater than normal)

Load Ratings & Performance

• Basic dynamic load rating (C): ~ 5.4 kN

• Basic static load rating (C₀): ~ 2.36 kN

• Fatigue (endurance) load limit (Pᵤ): ~ 0.1 kN

• Limiting (maximum) speed: ~ 17,000 rpm

• Reference (rated) speed: ~ 60,000 rpm

• Typical mass: ~ 0.020–0.022 kg (≈ 20–22 g)

Design & Usage Notes

• The double - sided rubber seals help keep grease inside and contaminants (dust, dirt, moisture) out -  making the bearing more suitable for environments where sealing and low maintenance are desired.

• With C3 internal clearance the bearing allows more room for thermal expansion or slight shaft/housing deformations without binding.

• As a deep - groove bearing , it supports primarily radial loads and also limited axial loads in both directions when needed.

• Dimensions and sealing make it suitable for electric motors, small machinery , pumps , small mechanical systems and other applications requiring sealed , low - maintenance bearings.